Part Names and Functions
⑤ ⑦ ⑧
③②
Front
Back
⑥
①
②
③
④ Speaker
⑤
⑥ Projection Lens
⑦ Lens Cap
(See page 60 for attaching.)
⑧
⑨ Lamp Cover
⑩
⑪
⑫ Power Cord Connector
⑬
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
⑭ Filter
⑮
Note:
⑪
LAN Connection Terminal is for the Network
function. Refer to the owner’s manual of “Network
Set-up and Operation” .
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCOKensington is a registered trademark of ACCO
Brands Corporation.
Do not turn on a projector with lens cap attached.
High temperature from light beam may damage
lens cap and result in fire hazard.
⑪
⑨
Bottom
⑮
①
⑬⑬⑫
⑭
④
⑩
To Next Page
Loading...
