PC adjust Menu
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five
independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific
computer.
1
2
Use the Point buttons to adjust the value,
eliminating a flicker from the image displayed (from 0 to
31).
Use the Point buttons to adjust the number of total
dots in one horizontal period to match your PC image.
Use the Point buttons to adjust the horizontal
picture position.
Use the Point buttons to adjust the vertical picture
position.
Vertical
Use the Point buttons to adjust the clamp level.
When the image has dark bars, try this adjustment.
Clamp
Press the MENU button to display the On-Screen
PC
adjust
button.
item and then press the SELECT button to display
the adjustment dialog box. Use the Point
buttons to adjust the setting value.
Use the Point buttons to adjust the vertical area
displayed by this projector.
Use the Point buttons to adjust the horizontal area
displayed by this projector.
Press the SELECT button to show and V-
of the connected computer.
Current mode
To Next Page
Loading...
