31
Store
To store the adjusted data, select Store and then press
to one of the Modes 1 to 10 in which you want to store,
and then press the SELECT button.
To clear the stored data, select and then
highlight to the Mode that you want to clear and then
press the SELECT button.
• cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
To reset the adjusted data, select and press the
SELECT button. A confirmation box appears and then
select . All adjustments will return to their previous
figures.
This Mode has stored
parameters.
Values of , ,
Vertical, , and
area V.
Vacant
Press SELECT
button to store the
data.
Press MENU
button to close this
dialog box.
Store
To Next Page
Loading...
