Setting
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The
factory default setting is in this
option.
....... Show the input image instead of
the countdown when turning on
the projector. Use this function
when you want to project the
image as early as possible even
when the lamp is not bright
enough.
........................... Hide the On-Screen Displays
except;
On-Screen Menu.
(p. 20)
P-Timer display. (p. 26)
No signal for Power
management (p. 49)
Please wait ...
Arrows for the True function in
the Screen Menu. (p. 34)
Background
Select the background screen for when no input signal is
detected. Press the Point buttons to switch between
each option.
Blue . . . Project a blue background.
. . . Project an image captured in the Logo
setting.
Black . . Project a black background.
Logo select
This function allows you to customize the screen logo
with Logo select, Capture, and
functions.
When On is selected in the Logo PIN code
lock function, Logo select and Capture
functions cannot be selected.
Logo select
This function decides on the starting-up display from
among following options.
......... Show the image you captured.
.... Show the factory-set logo.
........... Show the countdown display only.
To Next Page
Loading...
