Sanyo PLC-XU101 - Top Control

11
Part Names and Functions
q
w
r
y
u
i
q LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.54, 60).
u WARNING indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.51, 60).
w ON/STAND–BY button
Turn the projector on or off (pp.19, 20).
i POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(pp.46, 60).
e COMPUTER 1 button
Select COMPUTER 1 input source (p.26).
!0 MENU button
Open or close the On-Screen Menu (p.21).
t POINT ed7 8 (VOLUME +/–) buttons
–Select an item or adjust the value in the On-Screen
Menu (p.21).
–Pan the image in the Digital zoom + mode (p.34).
–Adjust the volume level (Point 7 8 buttons) (p.23).
Top Control
e
t
o COMPUTER 2 button
Select COMPUTER 2 input source (pp.26, 36).
o
!0
y SELECT button
–Execute the selected item (p.21).
–Expand or compress the image in the Digital zoom
mode (p.34).
r VIDEO button
Select VIDEO input source (p.35).