38
Chapter 4 Controlling the Projector
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Item Description
Screen .....................Switches the screen mode. (Normal, True, Wide, Full, Custom) There may not be avail-
able mode depending on the input mode as shown in the table below.
Input source
Screen mode Video Computer
Normal
True *
Wide
Full *
Custom
The mark "" means that the available screen mode in
the selected input source system. The error message
appears when selecting the disabled screen mode indi-
cated with "*".
Screen setting
This function is to adjust the screen mode of
the projector. The values in the text box rep-
resent the current screen status.
To Next Page
Loading...
