29
&RPSXWHU,QSXW
Auto PC Adjustment function is provided to automatically adjust )LQHV\QF, 7RWDOGRWV, +RUL]RQWDO
and Vertical to conform to your computer.
PC adjust Menu
$XWR3&$GMXVWPHQW
7RVWRUHDGMXVWPHQWSDUDPHWHUV
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector.
Once the parameters are stored, the setting
can be done just by selecting a 0RGH± in
the PC System Menu (p.28). See also “Store”
on page 31.
31RWH
)LQHV\QF, 7RWDOGRWV, +RUL]RQWDO and Vertical of
some computers cannot be fully adjusted with the
Auto PC Adjustment function. When the image is
not provided properly with this operation, manual
adjustments are required (pp. 30-31).
7KH$XWR3&$GMXVWPHQWFDQQRWEHRSHUDWHGZKHQ
480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p. 28), or when
the signal is coming from the HDMI terminal.
Press the MENU button to display the
2Q6FUHHQ0HQX8VHWKH3RLQWŸź
buttons to select PC adjust and then press
the Point Źbutton or the SELECT button.
1
2
8VHWKH3RLQWŸźEXWWRQVWRVHOHFW$XWR
PC adj. and then press the SELECT button.
$XWR3&DGM
Menu Operation
8VH3RLQWŸźEXWWRQVWRVHOHFW$XWR
PC adj. and press the SELECT button.
Please wait... appears while the Auto
PC adjustment is in process.
To Next Page
Loading...
Need help?
General
