Making and Answering Calls
Making Calls
Placing a call from your wireless phone is as easy as making a call
from any land line phone. Just enter the number and press and
you’re on your way to clear calls.
To place a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing,
press to erase one digit at a time. Press and hold to erase
the entire number.)
3. Press or . (To place a call when you are roaming and
Call Guard is enabled, see “Controlling Roaming Charges Using
Call Guard” on page 74.)
4. When you’re finished, press to end the call.
Tip:To redial your last outgoing call, press or twice.
Tip:When making calls off the network available to you, always dial using
11 digits (1 + area code + phone number).
You can also place calls from your wireless phone by using Speed
Dialing (page 33), using your Call History listings (page 82), and using
Voice-Activated Dialing (page 114).
Important:To maximize performance when using your phone, extend the
antenna before a call and do not touch the antenna during a call.
To Next Page
Loading...
