Sanyo SPW-C0705DXHN8 - Simplified Remote Controller

3-89
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
6. Simplified Remote Controller
Simplified Remote Controller / RCS-KR1AG
Operation Buttons
D: FAN SPEED selector
button
B: MODE button
E: FLAP button
C: Temperature setting
buttons
A: ON/OFF operation
button
G: Test button
F: Temperature Sensor
(Internal)
A : ON/OFF operation button This button is for turning the air conditioner on and off.
B : MODE button Use this button to select one of the following five operating modes.
(AUTO)
: Used to automatically set cooling or heating operation.
Only for single heat pump type
(Temperature range: 17 ~ 27 °C)
(HEAT)
: Used for normal heating operation.
Only for heat pump type
(Temperature range: 16 ~ 26 °C)
(DRY)
: Used for dehumidifying without changing the room temperature.
(Temperature range: 18 ~ 30 °C)
(COOL)
: Used for normal cooling operation.
(Temperature range: 18 ~ 30 °C)
(FAN)
: Used to run the fan only, without heating or cooling operation.
C : Temperature setting buttons
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.