Sanyo SPW-C0705DXHN8 - Operation

3-92
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
6. Simplified Remote Controller
Operation
STEP 3
STEP 2
S
TEP 5
STEP 4
STEP 1
NOTE

To warm up the system, the power mains must be turned on at least five (5) hours be-
fore operation.
STEP 1 To start the air conditioner
Press the ON/OFF operation button (
).
STEP 2 Setting the mode
Press the MODE button (
) to select the mode of your choice.
[
(AUTO), (HEAT), (DRY), (COOL) or (FAN)]
STEP 3 Setting the fan speed
Press the FAN SPEED button (
) to select the fan speed of your choice.
[
(AUTO), (HI.), (MED.) or (LO.)]
If AUTO is selected, the fan speed switches automatically.
STEP 4 Setting the temperature
Use the
or but ton as appropriate to change the temperature set-
ting as desired.
(
reduces the temperature, and increases the temperature.)
STEP 5 To stop the air conditioner
Press the ON/OFF operation button (
) again.