3-97
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
7. Remote Sensor
Remote Sensor / ART-K45AG
Parts Supplied with Remote Sensor
Remote Sensor Installation Guidelines
Place of installation
Mount the remote sensor at a height of 1 to 1.5 meters
above the floor where it can sense the average tempera-
ture of the room.
Do not mount the remote sensor in a place exposed to
direct sunlight or a place exposed to outside air such as
near a window.
Do not mount the remote sensor behind an object so that
it is separated from the air circulation of the room.
Mount the remote sensor within the room being air condi-
tioned.
The remote sensor must be mounted on the wall or other
surface vertically.
No.
Qty
1
2
2
23
Machine screws
M4 × 25
4
2
5
2
7
6
1
1
1
Spacers
Wire joints
Remote sensor
Installation manual
(comes with 200 mm wire)
Supplied parts
Clamp
Wood screws
To Next Page
Loading...
