3
3 - 41
Control of Mini ECO-i SYSTEM
4. System Controller
K: CHECK button This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
L: CENTRAL
CTRL button Use this button to inhibit individual operation by remote controller as
follows:
1: Individual ON/OFF operation is inhibited.
2: Individual ON/OFF, MODE and Temperature setting operation is
inhibited.
3: Individual MODE and Temperature setting operation is inhibited.
4: Individual MODE operation is inhibited.
No indication: Central control is cleared. (Individual operation)
M: SET button This button is used for setting indoor unit's address when installing the
air conditioner.
Do not use the SET button for normal operation.
N: CL button Use this button to reset the filter sign .
The air conditioner has the timer for the filter and informs you when the
filter needs cleaning.
O: VENTILATION butto
n
CAUTION
NOTE
This is used when a ventilation fan (available commercially) is connected.
Pressing the VENTILATION button turns the fan on and off. The ventilation
fan also turns on and off when the air conditioner unit is turned on and off.
(The display of the remote control unit shows “ ” while the ventilation fan
is running.)
* If “ ” is shown on the display of the remote control unit when the
VENTILATION button is pressed, this indicates that the ventilation fan is
not connected.
06-405 Mini-ECOi_TD3 11/6/06 6:18 PM Page 41
To Next Page
Loading...