42
7. TROUBLESHOOTING
7-1. Check before and after troubleshooting
7-1-1. Check power supply.
●
Check that voltage is in specified range (±10% of the rating).
●
Check that power is being supplied.
7-1-2. Check lead wires and connectors.
●
Check that coating of lead wires is not damaged.
●
Check that lead wires and connectors are firmly connected.
●
Check that wiring is correct.
Hazardous voltage can cause ELECTRIC
SHOCK or DEATH. Disconnect power or turn
off circuit breaker before you start checking
or servicing.
To Next Page
Loading...
