OPTION SETTINGS
English 134
POST-VIEW DISPLAY SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the [ ] button is pressed.
1 Display the Option Setting Menu [E1] (page 129).
2 Select “POST VIEW”, and press the
SET button.
1 sec:
The post-view image is displayed for
1 second.
2 sec:
The post-view image is displayed for
2 seconds.
OFF:
The post-view image is not displayed.
3 Select the desired setting, and press the SET button.
h This completes the post-view setting.
OK
OFF
2 sec
1 sec
POST VIEW
To Next Page
Loading...
Need help?
General