What to do if my Sanyo Xacti VPC-CA8GX doesn't capture images?
- JJames LoveJul 30, 2025
If your Sanyo Camcorder isn't capturing images, several factors could be at play. First, ensure the camera is powered on; if the power save function is active, reactivate the camera, or if it's off, use the ON/OFF button. Check if the memory card is full; if it has reached its maximum capacity, install a new card or delete unnecessary images. Also, verify the flash setting; if it's off, switch to automatic or forced flash mode. A dead battery can also prevent image capture, so recharge or replace the battery pack. Lastly, if the still image setting is on I and the digital zoom is off, adjust the still image setting to U or lower and turn the digital zoom on.