11
Getting Started
Antitheft Locking Device
k Only for models FB06BBE-S, FB6CCE-H, FB2CCE-S, FB12CCE-S,
FB6CCE-S
To fasten an antitheft locking device, use the lug located on the back
of the scale.
● Secure the scale at the place of installation, e.g., with a chain or a lock
Leveling the Scale
Purpose:
– To compensate for unevenness at the place of installation
– To ensure exactly horizontal positioning of the scale for consistent
reproducibility of the weighing results
Always level the scale again any time after it has been moved.
Leveling Scales
FB06BBE-S, FB6CCE-H, FB2CCE-S, FB12CCE-S, FB6CCE-S, FB12CCE-I
Only the two front feet are used for leveling.
● Retract the two rear feet
● Turn the two front feet as shown in the diagram until the air bubble
is centered within the circle of the level indicator
> Several leveling steps are usually required
● Extend the two rear feet until they touch the surface on which the
scale rests
Leveling Scales FBG34EDE-H, FBG34EDE-P, FBG16EDE-H, FBG12EDE-P,
FBG64EDE-S, FBG64EDE-H
● Adjust the three leveling feet until the air bubble is centered within the
circle of the level indicator
To Next Page
Loading...
