25
Operating the Scale
Example W2
Enter “ABC123” as a weight ID
Note:
– The sample ID generally applies to one weighing operation only
– The ID is deleted after data output
Step Key (or instruction) Display/Output
Initial status (scale unloaded)
(ID can also be entered while scale
is loaded)
1. Enter the letter “A” a
2. Select and enter the letter “B” a
Softkey B (Key Y)
3. Select and enter the letter “C” a Softkey . .
(Key Y Y)
4. Enter the numbers “1,” “2” and “3” 1 2 3
5. Store the ID Press the SP.ID soft key
(max. 20 characters) v/[FUNCTION]
– The next printout will include this ID
To Next Page
Loading...
