41
Operating the Scale
Example P2: Weighing in Percent with Reference Weight Entered Using the Numeric Keys
Step Key (or instruction) Display/Output
1. Select the weighing-in-percent see “Preparation”
application in the Setup menu
2. Prepare a container for the parts Place the empty container
on the scale
3. Tare the scale t
4. Enter the reference weight using 1 2 0
the numeric keys (here: 120 g)
5. Store the reference weight W100% soft key
[ISOTEST]/[TEST]
6. Determine the percentage Place sample to
of an unknown weight be measured in the container
(in this case: 114.78 g)
To Next Page
Loading...
