40
Practical Examples
Example P1: Weighing in Percent with Reference Weight Taken from Weight on Scale
Step Key (or instruction) Display/Output
1. Select the weighing-in-percent see “Preparation”
application in the Setup menu
2. Prepare a container for the parts Place the empty container
on the scale
3. Tare the scale t
4. Place the reference weight Place weight equal
on the scale to reference weight in
(here: 1821.48 g =100%) the container
5. Initialize the scale start soft key
v/[FUNCTION]
6. Unload the scale Remove reference weight
from the container
7. Determine the percentage Place sample to
of an unknown weight be measured in the container
8. If desired, print percentage p/[PRINT]
(here: 98.37%)
pRef + 100 %
Wxx% + 1821.48 g
Prc + 98.37 %
To Next Page
Loading...
