Sartorius FB - Recalculation Application: Settings and Additional Functions; Factory Settings, Preparation, Parameter Settings, and Additional Functions

54
Factory Settings
Print application parameters
(automatic output of application
parameters): off (7 1 1)
Line format: for other apps/GLP
(7 2 2)
Preparation
● Turn on the scale:
Press e/[ON/OFF]
> All display segments light up
● Select the Recalculation applica-
tion in the Setup menu: Press M
● Select menu:
Press the menu soft key
(w/[TOGGLE])
● Set parameter 2 1 9:
see “Configuring the Scale”
● Exit the Setup menu: Press M
Setting Parameters for the
Recalculation Application
$ Access the Setup menu:
Select MENU
● Set parameters for:
– Automatic printout:
7 1 Print app. para.
– Line format:
7 2 Line format
see “Configuring the Scale”
● Exit the Setup menu: Press M
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
input), and
– printing,
you can also access the following
functions from this application:
Calibration/Adjustment
● Press [ISOTEST]/[TEST]
> See “Calibration/Adjustment”
for further instructions
Setup (setting parameters)
● Press M
> See “Configuring the Scale”
for further instructions
Turning Off the Scale
● Press e/[ON/OFF]
> The scale shuts off
> The display goes blank