Sartorius FB - Operating the Scale: Data Output Formats; Line Format, Normal Operation, Special Codes, and Error Codes Output

65
Operating the Scale
Line Format (Data Output Format)
You can output the values
displayed in the measured value line
and the weight unit with or without
a data ID code
Example: Without data ID code
+ 253 pcs
Example: With data ID code
Qnt + 253 pcs
Configure this parameter in the Setup
menu under item 7 2.
The output with data ID code has
16 characters; without data ID code,
22 characters.
Output Format with 16 Characters
Display segments that are not activated are output as spaces.
Characters without a decimal point are output without a decimal point.
The following characters can be output, depending on the characters
displayed on the scale:
Normal Operation
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+*DDDDDDDD*UUUCRLF
or – ........ ***
or * ********
or 000000
*: Space
D: Digit or letter
U: Unit symbol
CR: Carriage return
LF: Line feed
Special Codes
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
******––******CRLF
or H H
or L L
or C
*: Space
– –: Weight; all numbers shown in stable readout
H: Overload
H H: Overload during checkweighing
L: Underload
L L: Underload during checkweighing
C: Calibration/adjustment
Error codes
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
***E r r *###****CRLF
*: Space
# # #: Error code number