Sartorius FB - Operating the Scale: Data Output Details; Unit Symbols, ID Characters, Special Codes, and Error Codes

66
Data output example: + 1255.7 g
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+***1255. 7*g**CRLF
Position 1: Plus or minus sign or space
Position 2: Space
Positions 3 –10: Weight with a decimal point; leading zeros = space
Position 11: Space
Positions 12 –14: Unit symbol or space
Position 15: Carriage return
Position 16: Line feed
Data Output with 22 characters
When data with an ID code is output, the ID code consisting
of 6 characters precedes the data with the 16-character format.
These 6 characters identify the following value.
12345678910111213141516171819202122
IIIIII+*DDDDDDDD*UUUCRLF
*****– . . ...... ***
* ********
000000
I: ID code character
1)
U: Unit symbol
1)
*: Space CR: Carriage return
D: Digit or letter LF: Line feed
1)
depends on scale type; e.g., not all units and characters are available
on scales verified for use in legal metrology
Special Codes
12345678910111213141516171819202122
S t a t ********––******CRLF
HH
LL
C
*: Space L: Underload
– –: Weight; all numbers shown L L: Underload during
in final, stable readout checkweighing
H: Overload C: Calibration/adjustment
H H: Overload during checkweighing
Error codes
12345678910111213141516171819202122
S t a t *****E r r *###****CRLF
*: Space # # #: Error code number
Unit symbol U
1)
No stability parameter
g Grams
k g Kilograms
c t Carats
l b Pounds
o z Ounces
o z t Troy ounces
t l h Hong Kong taels
t l s Singapore taels
t l t Taiwanese taels
G N Grains
d w t Pennyweights
m g Milligrams
/ l b Parts per pound
t l c Chinese taels
m o m Mommes
K Austrian carats
t o l Tola
b a t Baht
M S Meshgal
% Percent
p c s Pieces (piece count)
ID code characters
1)
Stat Status
T2 Application tare memory
N Net weight (T1 = 0)
N1 Net weight (T1 0)
Qnt Quantity
Prc Percentage
nRef Reference sample quantity
pRef Reference percentage
wRef Average piece weight
Wxx% Reference percentage weight
NUM Numeric input
Compxx Component no. xx in net-total
component mode
Tot.cp Total weight in net-total
component mode
mDef No. of subweighs
for animal weighing
Mul Multiplication factor
for animal weighing
x-Net Result in animal weighing
x-Res Calculated result
in animal weighing
Setp Target value for checkweighing
Min Lower limit for checkweighing
Max Upper limit for checkweighing