14
Totalizing
Purpose
With this application program you can add up successive weight values exerding capacity
of balance.
Example: Totalizing weight values
Step Key (or instruction) Display
1. Select application program (Zero) > 2 sec
2. Select Totalizing (F) repeatedly
3. Confirm setting (Enter)
Symbol “ “ on the display: application is active
4. If necessary: zero the balance (Zero)
5. Place sample on balance
(in this example, 380 g)
6. Store value in memory.
Total weight is displayed (Enter)
steadily; symbol flashes.
7. Remove sample from balance
8. Place the next sample on the balance
(in this example, 575 g)
9. Store value in memory. Totalized stored (Enter)
weight is displayed; symbol flashes.
Note: symbol remains on indicating
stored value in memory until cleared
10. To view the current weight for 2 seconds (F)
(if a printer is connected, a printout is generated)
11. Clear totalizing memory (F) > 2 sec
(if a printer is connected, total is printed)
12. End Totalizing (Enter) > 2 sec
13. Reactivate Totalizing (if no other (F)
application program has been selected)
(if a printer is connected, total is printed).
14. Repeat procedure starting from Step 6.
To Next Page
Loading...
