Connecting the Balance to AC Power
§ It is recommended to use only the included AC
adapter for optimal performance and safety.
§ Insert plug into the jack (located on back of balance)
§ Plug the AC adapter into an electrical outlet
!LISTED power supply 11 V–21 V compliant with
NEC Class 2 output.
Below-Balance Weighing
A port for a below-balance weighing hanger is
located on the bottom of the balance.
§ Open the cover plate on the bottom of the balance.
§ Attach the sample (e.g., using a suspension wire)
to the hanger.
$ Install a shield for protection against drafts if
necessary.
5
5
To Next Page
Loading...
