Leveling the Balance
(only for models AY303, AY123)
§ Always level the balance again any time after it has
been moved to a different location.
Example: moving bubble from R to L
§ Turn the feet as shown in the diagram until the
air bubble is centered within the circle of the level
indicator.
> In most cases this will require several adjustment
steps.
Removing Weights
for Calibration/Span Adjustment
(only for models AY612, AY412, AY212, AY711,
AY511, AY303, AY123)
§ Grasp the tab to turn and remove the weight
compartment.
$ Follow instructions on page 16 for calibration/span
adjustment.
7
To Next Page
Loading...
Need help?
General