7.5 Statistics (Secura
®
and Quintix
®
only)
Purpose: Save weight values and statistically evaluate them. You can save up to 99
components. The values are generated as results:
– Number of components
– Average
– Standard deviation
– Variation coefficient
– Sum of all values
– Lowest value (minimum)
– Highest value (maximum)
– Spread: Difference between maximum and minimum
Prerequisites: For printouts, a printer must be connected and configured (see “USB Port” on
page 79).
t Select the Menu key in any application.
t Select the Statistics symbol in the menu.
Max 2100 g d
=
0.01 g
0.00
Component
1
y The Statistics application appears.
Component
1
t To change settings, select the gray button.
Statistics
Print component Automatic tare
Off
OnOn
Off
y The Statistics settings window appears.
t Choose whether the individual weights of the components are printed out.
t Determine whether the balance is tared when a component is saved.
t Select l to confirm.
t Select A to zero the balance if necessary.
t Place a container on the weighing pan.
To Next Page
Loading...
