The following symbols are used in these instructions:
t Indicates a required action
y Describes what happens after you have performed a particular step
Perform steps in the specified order:
1. First action
2. Second action
3. …
– Indicates an item in a list
Conventions for this user manual:
– The figures in this manual are based on “standard” balances.
Some displays and printouts shown in the figures may differ from those of
verified balances. The differences are explained in detail where they affect the
operation of the balances.
1.3 Application Advice/Technical Support
Contact addresses for application advice and technical support can be found online at
http://www.sartorius.com
To Next Page
Loading...
