4. Getting Started
The balance must be disconnected from the mains power for all assembly work.
4.1 Unpacking and Equipment Supplied
t Open the packaging, making sure to remove all parts carefully.
t After unpacking the device, check it immediately for any external damage.
y If you detect any damage, proceed as directed in the chapter entitled “Care and
maintenance.”
y Save the box and all parts of the packaging for any future transport. During
shipment, please do not leave cables plugged in!
The following parts are included in the equipment supplied:
Components Balance with Draft Shield Precision Balances
Readability: 0.1 mg 1 mg 10 mg, 0.1 g, and 1 g
Draft shield
–
Weighing pan:
d 90 mm
– –
Weighing pan:
d 120 mm –
–
Weighing pan:
d 180 mm – –
Pan support
Shield disk (precision balances) – –
Pan draft shield (Secura
®
only)
– –
AC adaptor with country-specific
power plug
In-use dust cover
Dust cover
–
Installation and operating
instructions
Application guide
To Next Page
Loading...
