Sartorius Practum - Conversion (Secura and Quintix Only)

62
Weighing
User Manual Secura
®
, Quintix
®
, Practum
®
7.9 Conversion (Secura
®
and Quintix
®
only)
Purpose: Use this application to multiply the weight value by a user-defined factor. Division is
also possible if a factor of less than one is selected. The selected factor is saved to
protected memory.
Example: You want to calculate the weight per unit of a sheet of paper (DINA4).
To do so, proceed as follows:
– The weight per unit (e.g., 80g/m
2
) can be determined by dividing the weight by
the surface.
– The surface of a sheet of DINA4 paper is:
0.210 + 0.297 = 0.06237 m
2
.
– Division by 0.06237 is equal to multiplication by reciprocal value 1/0.06237,
i.e., 16.03335.
– Set the factor to 16.03335 in the application.
t Select the Menu key in any application.
t Select the Conversion symbol in the menu.

Max 2100 g d
=
0.01 g
0.00
Factor
1
y The Conversion application appears.
The multiplier is displayed under Factor.
Factor
1
t To set the factor and accuracy of the conversion, select the gray button.

Conversion
Factor Accuracy
16.03335
1
2
0
0.0
0.00
y The Conversion settings window appears.
t On the left, enter the factor by which the weight of the sample will be multiplied.
Select a value or select t, enter the desired value, and confirm with l.
t Select the accuracy of the conversion display on the right.
t Select l to confirm.
t Select A to zero the balance if necessary.
t Select w.