5
Connecting the Balance/Scale to AC Power/
Safety Precautions
Use only original Sartorius AC adapters:
– for Europe: 6971948
Insert the right-angle plug into the jack
Plug AC adapter into electrical outlet
The ground terminal is connected to the balance/scale
housing,
which can be additionally grounded for
operation.
Using a Non-Rechargeable/Rechargeable Battery
(not for models AZ214, AZ124, AZ64, AZ3102,
AZ1502, TE214S, TE124S, TE64, GD603, GD103,
GD502-DS, GD252, TE313S, TE153S, GE3102,
TE3102S, GE2102, TE1502S, GE1302)
$ A non-rechargeable or rechargeable battery is not
included with the equipment supplied
!Use only a commercially available non-rechargeable
(8+ AA/Mignon) or rechargeable battery
!When using a rechargeable battery, always use an
external charger to recharge the battery
Lay the balance/scale on its side
Lift the compartment cover
Insert the non-rechargeable (8+ AA/Mignon)
or rechargeable batteries into the compartment
$
Make sure to connect the positive and negative poles
correctly
Close the battery compartment:
Press down on the cover until it clicks into place
!All used batteries are classified as waste that requires
special handling (not “household” waste). Dispose
of rechargeable batteries in accordance with the
applicable special waste disposal regulations
To Next Page
Loading...
