Automatic OPEN WINDOW function Thermostat lock with keycode
Thermostat has automatically turned on function of detecting
if there's an open window nearby. The function turns on, when
the room temperature suddenly falls for 4.5°C or more and
then the thermostat turns off the heating to prevent
unnecessary energy loss. Function turns off when the room
temperature increases for at least 1.5°C or after 48 minutes
when the function activates or if the user presses any of the
thermostat’s buttons. The thermostat then returns to its
previous working mode. When the function is turned on, a
symbol appears on the screen (see on the right).
Thermostat has an option of key lock function. This means that when the thermostat is locked, pressing any button
makes no change to the thermostat function or heating schedule until unlocked. Thermostat, when locked, works
normally and regarding present instructions (e.g. Set temperature, heating schedule, …). Default code to unlock the
thermostat is 000. You can change this code to your preferences in the advanced thermostat settings. Thermostat can
be locked by holding the side button for about 3 seconds. The display shows a blinking lock symbol
You can unlock the thermostat by holding any button on the thermostat for at least half a second. The thermostats
display shows 000 and on the right side of the display shows P51 which means you’re entering the first key of the
password (Password 1). Select the first number by pressing the up and down buttons. When you've entered the
correct number, press menu button to proceed on setting the P52, second password number. After you've set second
number, proceed to setting the last P53 number and when you've set the last number, confirm the unlock by short
pressing the ON/OFF button. You've successfully unlocked your thermostat
Keylock symbol
Thermostat is locked
MENU
button
ON/OFF
btton
Down button
Lock thermostat button
TIME
button
Up button
18 19
To Next Page
Loading...
Need help?
General
