10
1.11 Receive Version Number
HOST REQUEST
Message Type - '9'
Message Body - none
REPLY
Message type - '9'
Message Body:
'XXX' if checksum of ROM is OK. If the checksum is not OK, this field will be '000'.
where:
'XXX' is the version number
1.12 Error Replies
The instrument will send the following error messages in response to incorrect host requests:
Message Body:
'XK'
Powermeter is in definition mode
'XP'
Invalid set point value or set point is not available
'XF'
Invalid message format or checksum
'XM'
Invalid request type
To Next Page
Loading...
Need help?
General
