Satel CA-10 - Armed Modes; Full armed mode; Silent armed mode

CA-10 SATEL
3
Basic functions of CA-10:
•
signaling burglary, panic and fire alarms,
•
telephone messaging about the alarms with voice or pager messages,
•
answering phone calls and informing the user of the system status (whether there
was an alarm condition since last arming),
•
MONITORING - communication with telephone monitoring stations (real-time
transmission of detailed information about selected events in the protected facility),
•
printing current information about all the system events on an external printer.
Features of CA-10:
•
panel operation controlled with remote keypads,
•
remote control by means of a telephone set (selected functions) - interfacing with
the MST-1 module,
•
real-time status display for armed zones,
•
viewing alarm condition and trouble logs available (for up to 255 events),
•
option to subdivide the alarm system into 4 partitions (subsystems),
•
any partition can be operated by up to 13 users with independent access codes
(up to 32 access codes) - the access codes can have different authority level, any
instance of using them is recorded in the event log,
•
remote control of locks, lighting system and other devices from the panel keypads,
•
activation of PANIC, FIRE and AUXILIARY alarms from the keypads,
•
various system arming options (with automatic bypassing, with no-exit bypassing),
•
internal clock capable of automatic arming and disarming of the system,
•
automatic diagnostics of the basic components of the alarm system.
Armed Modes
To adapt the alarm system to various needs, the CA-10 control panel offers several
armed modes:
Full armed mode
The mode in which detectors connected to the panel control the protected facility and
violation of the protected zones is signaled by the panel with all available means (sirens,
reporting to telephone monitoring stations, telephone messages).
Silent armed mode
Armed mode in which alarms are signaled only in the panel keypads. The installer can
decide which of the detectors are to be automatically bypassed on activating this mode;
he can also choose signaling device to be used in that mode.