6 VERSA SATEL
2.4 Sound signaling
The installer can disable the sound signaling.
2.4.1 Beeps generated when operating
1 short beep – pressing any number key.
3 short beeps – confirmation of:
– starting the arming procedure (there is exit delay in the partition) or arming (there is no
exit delay in the partition),
– disarming and/or alarm clearing,
– selecting the partition which is to be armed or disarmed, or where alarm is to be cleared
– in such a case the keypad is waiting for the code to be entered,
– turning output off,
– turning off the CHIME in the keypad, using the key.
4 short beeps and 1 long beep – confirmation of:
– turning output on,
– turning on the CHIME in the keypad, using the key.
1 long beep – denial of arming (some zones in the partition are violated or there is a trouble).
2 long beeps – incorrect code or pressing the , , , or key, if not
preceded by entering code or selecting a partition.
3 long beeps – refusal to carry out a command (the user does not have the required
authority level or the function is not available).
2.4.2 Beeps generated during programming
1 short beep – pressing any number key.
2 short beeps – entering the user menu, submenu or a function, or going to a next
programming step.
3 short beeps – end of timer parameters editing, exiting the service function on pressing the
key.
4 short beeps and 1 long beep – termination of the user function on pressing the
key,
or quitting the service mode.
2 long beeps – exiting the function on pressing the key, or an unavailable function.
2.4.3 Events signaled by sounds
Only installer selected events are signaled.
Duration of the alarm signaling is to be defined by the installer.
If the GRADE 2 option is enabled by installer, the keypad will not signal by sounds any
new troubles and alarms.
5 short beeps – zone violation (CHIME).
Long beep every 3 seconds, followed by a series of short beeps for 10 seconds
and 1 long beep – countdown of exit delay (if the time is shorter than 10 seconds, only
the final sequence of short beeps will be generated).
2 short beeps every seconds – countdown of entry delay.
2 short beeps every 3 seconds – signaling a new trouble.
Short beep every 0.5 seconds – warning alarm.
To Next Page
Loading...
