Satel Versa - Service

28 VERSA SATEL
 deactivate for 16 seconds the 11. FIRE DETECTORS POWER SUPPLY function output (to clear
the alarm memory of fire detectors),
 activate the 21. D
ET
Enter the user menu a
ECTORS RESETTING function output.
nd press in turn .
3.20 Service
The functions related to control panel programming (starting local or remote programming)
are described in the PROGRAMMING manual.
3.20.1 Defining the service access rules
Enter the user menu and press in turn . The status of options related to the
by the LEDs
indicate which options are enabled. Blinking of the
ere. The
access to the alarm system by the person using the service code is illustrated
designated by numbers. The LEDs lit solid
LED means that the cursor is positioned th and keys allow you to move
s illustrating the available options. the cursor. You can only move the cursor onto the LED
the LED status (turn ON/OFF). Press
to confirm the
ode can be used to get access
equirements of the EN 50131 standard for
Press any numeric key to change
changes made and quit the function.
Description of the options
In the square brackets, the description of options presented on the LCD keypad is shown.
1 [Permanent access] – if the option is enabled, the service c
to the alarm system at all times.
If the alarm system is to meet r
Grade 2, the service code access should be time limited.
2 [Edit users] – when the option is enabled, the person using the service code can add, edit
e option is enabled, the person using the service code can arm
The function is available when the PERMANENT ACCESS option is disabled (see: “Defining the
and remove users.
3 [Arm/Dis/Clr/Bps] – when th
and disarm the system, clear alarms, and bypass zones (inhibit or isolate).
3.20.2 Defining the service access time
service access rules”).
Enter the user menu and press in turn . LEDs 1-12 will present the number
of remaining hours during which you can get access to the alarm system by using the service
code (see page 11 Table 1). Enter a new value from the range of 0 to 255 hours and press
.