To Next Page
J
Jacob JonesAug 28, 2025
What to do if my SATO Label Maker shows a paper end error?
- MMarcus WhitakerAug 28, 2025
If your SATO Label Maker runs out of paper, set the paper properly.
What to do if my SATO Label Maker shows a paper end error?
If your SATO Label Maker runs out of paper, set the paper properly.
What causes a 'Sensor error' on a SATO CG408TT and how do I fix it?
A 'Sensor error' on your SATO Printer can be due to a wrong sensor level, wrong sensor type, too big a value set for pitch offset, or label meandering. Adjust the level, adjust the sensor type, or set a smaller value for the pitch offset.
What to do if my SATO Printer labels are not dispensed?
If labels are not dispensed from your SATO Printer: Set dispenser unit correctly Clean the Dispensing roller and Platen roller.
What to do if my SATO CG408TT shows 'Ribbon near end'?
If your SATO Printer displays 'Ribbon near end', it indicates that there is not much ribbon left. Replace the ribbon to resolve this issue.
What to do if my SATO CG408TT Printer is not feeding media?
To address the issue of your SATO Printer not feeding media: Set media correctly, Set the sensor correctly by Utility Tool setting Check the connection of sensor cable. Adjust sensor level Clean the platen roller.
What to do if my SATO CG408TT displays 'Ribbon end' error?
If your SATO Printer shows a 'Ribbon end' error, it means that the printer is either out of ribbon or the ribbon is ripped, or the ribbon is not set properly. To fix this, set the ribbon properly.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 104 mm |
| Memory | 8MB Flash ROM, 16MB SDRAM |
| Print Speed | 4 ips |
| Media Sensor | Reflective and Transmissive |
| Interface | USB, RS232C |
| Optional Interfaces | Ethernet |
| Media Type | Roll, Fanfold |
| Media Width | 22 mm to 118 mm |
| Media Thickness | 0.06 mm - 0.2 mm |
| Ribbon Width | 40 mm to 110 mm |
| Power Supply | AC 100-240V, 50/60 Hz |
Explains pictographic symbols used in the manual and on the printer for safety.
Guidelines for choosing an appropriate and safe location for the printer.
Instructions and considerations for connecting the printer to a power source.
Lists the key features and capabilities of the CG4 Series printer.
Instructions for unpacking the printer and identifying included accessories.
Identifies and labels the main components of the printer's front and back views.
Guidance on selecting an appropriate location and choosing the correct media for the printer.
Step-by-step guides for loading roll media and carbon ribbon into the printer.
Guides on connecting power cables and various interface types for the printer.
Details the buttons and LED indicators on the printer's front panel.
Explains the different operational modes of the printer and how to access them.
Instructions for User and Factory Test Print modes for diagnostics.
Covers Operation Setting, Download, Default, and HEX Dump modes.
Lists various printer settings and their default values or ranges.
Interprets printer error signals (LEDs, buzzer) to diagnose problems.
Provides common printer problems and their potential solutions.
Guides on troubleshooting interface issues and using test prints for diagnostics.
Detailed instructions for cleaning the print head, platen, rollers, and using cleaning kits/sheets.
Information on how to easily replace the print head and platen roller.
How to optimize print quality via darkness and speed settings.
Lists physical, power, environmental, and print specifications for the CG4 Series.
Specifications for optional cutter, dispenser, and linerless kits.
Details the different interface types available for the CG4 Series printers.
Specifications and communication settings for the RS232C serial interface.
Specifications and pin assignments for the IEEE 1284 parallel interface.
Specifications and pin assignments for USB and LAN interfaces.
Details on optional cutter, dispenser, and their installation/usage.
Covers sensor positions, operation modes, reference points, and offset adjustments.
Describes printer behavior when paper or ribbon runs out.
Lists contact information for SATO worldwide operations.
