SATO CL412e - Page 122

Page 6-22
Section 6. Replacement Procedures
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
Replacing the Ribbon Drive Clutch Washers
Fig. 6-25
Fig. 6-26
Fig. 6-27
FASTEN ITEM 11
WITH (2) SCREWS
TEETH/SLOTS ON
ITEM 9a DISC PLATE
FACING TOWARDS
FELT WASHER
ITEM 6 OIL-LESS
WASHER
ITEM 9A/9B
DISK PLATE
ITEM 11 TEETH FACING
OUTWARD TO ENGAGE
ITEM 10 FELT WASHER
ITEM 8 RIBBON
BOSS
LOCATION
HOLES
INSERT PEGS INTO
LOCATION HOLES
ITEM 8 RIBBON
BOSS
ALIGN HOLE
WITH PEG
Fig. 6-28