SATO CL612e - Page 132

Page 6-26
Section 6. Replacement Procedures
SATO CL608e/CL612e Service Manual
PN 9001079
Rev.B
Replacing the Ribbon Drive Clutch Washers
Fig. 6-45
Fig. 6-46
Fig. 6-47
FASTEN ITEM 11
WITH (2) SCREWS
TEETH/SLOTS ON
ITEM 9a DISC PLATE
FACING TOWARDS
FELT WASHER
ITEM 6 OIL-LESS
WASHER
ITEM 9a/9b
DISK PLATE
ITEM 11 TEETH FACING
OUTWARD TO ENGAGE
ITEM 10 FELT WASHER
ITEM 8 RIBBON
BOSS
LOCATION
HOLES
INSERT PEGS INTO
LOCATION HOLES
ITEM 8 RIBBON
BOSS
ALIGN HOLE
WITH PEG
Fig. 6-48