SATO CL612e - Page 81

Page 4-5
Section 4. Electric Checks and Adjustments
SATO CL608e/CL612e Service Manual
PN 9001079
Rev. B
DIGITAL
MULTIMETER
LCD DISPLAY
VOLT
COM
CABLE TO PCB
DIAL
GROUND
PIN
TP TEST MODULE
SIG PIN
PROBES
TEST POINT CHART
NOTE: The power supply voltages are not
adjustable. All voltages must read within +/-
10% of the nominal value for correct operation
of the printer.
DC Power Voltage Checks
SOPlaiDCSIDEGNAREGATLOVELUDOMTSETPT
GS
CN
0V5+V2.5+ot8.4+)DNG(1AHC-)V5+(3AHC
1V0.2+V1.2+ot09.1+)DNG(1AHC-)V0.2+(4AHC
2V3.3+V5.3+otV1.3+)DNG(1AHC-)V3.3+(5AHC
3V42+V5.42+otV5.32+)DNG(1AHC-)V42+(6AHC
B1
B6
A1
A6
GND
+5V
+2.0V
+3.3V
+24V