SATO CX400 Service Manual PN 9001110A Page 6-1
6
TECHNICAL DATA
All technical data deemed pertinent has been tabulated below for quick reference. Find the
relative section header and then locate the specific type of technical data in the left column.
PHYSICAL PROPERTIES
Dimensions 7.76” (197mm) x 10.2” (257mm) x 6.5” (164mm)
Weight (3.67kg) Including power module.
ENVIROMENTAL SPECIFICATIONS
Operating Temperature (5° to 40° C)
Storage Temperature (-20° to 60° C)
Operating Humidity 25 to 85 % RH, Non-Condensing
Storage Humidity 25 to 85 % RH, Non-Condensing
POWER REQUIREMENTS
Source Voltage to Power Module 120 VAC, 60 Hz, 90 W
Supply from Power Module 19 VAC
Operational Power Consumption 70 W
Standby Power Consumption Less than 2W
PRINTER PERFORMANCE
Print Speed 1, 2, 3, 4 ips
Resolution 203 Dots per Inch (8 dpmm)
Maximum Print Width 4.1” (104mm)
Maximum Print Length 50” (1270mm)
PRINTER SPECIFICATIONS
Print Method Thermal Transfer or Direct Thermal
Onboard CPU Hitachi SH7034 (16 Bit External, 32 Bit Internal)
Integrated CLock 20M Hz (26 MIPS)
Panel Features Green Power LED, Red Error LED, Feed Button
DRAM 2MB
Flash ROM 2MB
Additional Memory 2 or 4 MB Flash ROM
To Next Page
Loading...
