SATO CX400 - Using the Printer; Feeding Blank Labels; Label Reprint; Sending Data to the Printer

Section 2: Accessories Installation
SATO CX400 Service Manual PN 9001110A Page 2-3
Cutter Installation, Figure 2-2
DISPENSER ATTACHMENT
The dispenser assembly incorporates an integrated label sensor as part of the monitoring
feature. The sensor identifies the presence of a label and prevents the printing of the next label
until it is removed.
The following procedure provides detailed instructions on dispenser and dispenser sensor
installation. The procedure assumes that the unit is without additional attachments that may pose
an impediment to sensor installation.
CAUTION: Printer electronics are susceptable to static discharge.
Ensure appropriate grounding measures are taken before
beginning any activity inside the printer.
8
9
10
11
12
17
16
15
13
DETAIL
14
8
9
10
11
12
17
16
15
13
DETAIL
14