Section 6: Technical Data
Page 6-2 PN 9001110A SATO CX400 Service Manual
Onboard Sensors Media Index - Reflective or Gap/Eye-Mark.
Ribbon Out Sensor
Print Head Open
Text Fonts U, S, M, WB, WL, XU, XS, XM, XB, XL, OCR-A/B.
Text Rotation 0, 90, 180, 270 Degrees, Four direction rotational.
Graphics Formats SATO Hex/Binary, PCX.
Graphics Rotation 0, 90, 180, 270 Degrees
Bar Code Capabilities UPC A/E, EAN8/13, EAN128, Code 39, Code 93, Code 128,
MSI, I25, M25, Codabar, PDF417, UCC128, Postnet, Bookland,
MaxiCode.
Interface Connections RS-232C Serial Interface Port w/ DB9-S Connector
IEEE-1284 Compatible Parallel Interface Port
AC Power Module 120 VAC Input, 19 VAC Output. Class 2.
Wall Mounting Brackets Located on bottom for anchor mounting to wall.
MEDIA SPECIFICATIONS
Media Type Direct Thermal - Paper or synthetic label or tag.
Thermal Transfer - Paper or synthetic label or tag.
Maximum Label Roll Diameter 5” (127mm)
Label Roll Core Diameter 0.75” (19.05mm)
Minimum Inter-label Gap 0.08” (2mm)
Maximum Inter-label Gap 1” (25.4mm)
RIBBON SPECIFICATIONS
Ribbon Material Wax, resin, or combination.
Maximum Ribbon Roll Diameter 1.50” (38mm)
Maximum Ribbon Length 100m
Ribbon Roll Core Diameter 0.72” (18.4mm)
SERIAL INTERFACE SPECIFICATIONS
Interface Type RS-232C Port w/ DB9-S Connector.
Speed 9600, 19200, or 38400 Baud.
Parity Odd, Even, or None.
Data Bits 7 or 8
Stop Bits 1 or 2
Default Parameters 9600 Bauds, No Parity, 8 Data Bits, 1 Stop Bit.
REGULATORY APPROVALS
FCC Class B, CE, TUV, CCC, and UL.
PRINTER SPECIFICATIONS
To Next Page
Loading...
