SATO GT424 - Page 143

Section 6: Troubleshooting
GT Series Operator’s Manual Page 6-9
23
RFID Tag error
Cause:
Remedy:
Alarm sound:
External signal:
Writing into RFID tag could not be performed normally
Write information in another RFID tag
Three short beeps
Machine error
RFID Tag error
Cause:
Remedy:
Alarm sound:
External signal:
Writing into the RFID tag could not be performed
normally
Replace the RFID tag. Press the Line key to retry
Three short beeps
Machine error
RFID Protect error
Cause:
Remedy:
Alarm sound:
External signal:
The RFID tag is write-protected. Information cannot be
written to it
Replace the tag with one that is not write-protected
Three short beeps
Machine error
24
Non-lock error
Cause:
Remedy:
Alarm sound:
External signal:
The knob of the ribbon-winding unit is not locked
Lock the knob of the ribbon-winding unit
Three short beeps
Machine error
Error No. LCD Message Description