Section 5: Interface Specifications
GT Series Operator’s Manual Page 5-1
5
INTERFACE SPECIFICATIONS
5.1 INTERFACE TYPES
At the time of purchase, the GT Series printers are supplied with a single interface of the user’s
choice: typically a parallel interface is used for transmitting data to and from the host, and an
optional external signal interface for connecting to other peripherals. Additionally, an optional
Mini-LAN card can be installed in the GT series to provide printer status information to a LAN.
The following are the different types of interface boards available:
1) RS232C Interface Board
2) Parallel Interface Board
3) IEEE 1284 Interface Board
4) USB Interface Board (Ver. 2.0)
5) LAN Interface Board (10Base-T/100Base-T)
6) IEEE 802.11b Wireless LAN Interface Board
7) Mini LAN Interface Board (10Base-T/100Base-T)
8) External Signal Interface Board
To Next Page
Loading...
