Section 3: Configuration and Operation
Page 3-38 GT Series Operator’s Manual
3.13.2 If Yo u Chose to Reset Printer Settings
In the previous menu, if you chose PRINTER SETTINGS, the
following screen appears.
4. Press the arrow buttons to choose between YES and
NO. If you select NO, you will return to the main DEFAULT
MODE screen.
5. Press ENTER to proceed to reset printer settings.
3.13.2 If Yo u Chose Alt Protocol Code
In the previous menu, if you chose the ALT. PROTOCOL option,
the following screen appears.
4. Press the arrow buttons to choose between YES and
NO. If you select NO, you will return to the main DEFAULT
MODE screen.
5. Press ENTER to proceed to reset the Alt. Protocol code.
3.13.3 Completion of Default Setting
After the settings chosen in the previous menus have been reset,
the following screen appears.
Turn the printer OFF to exit the Default Mode.
To Next Page
Loading...
