SATO LP 100R - Page 61

A P P E N D I X C
C-1
LP 100R PRINTER EQUIPMENT SPECIFICATIONS
Item Description
1. Printing Method ■ Dry Electro Photographic
■ Laser Diode Exposure
2. Printing Speed ■ 3,300 LPM (6LPI)
3. Printing Resolution ■ 240/300/400/480/600 DPI (Changeable)
■ 400 is standard
4. Print Duty (B/W Ratio) ■ Max. 25% (TBD)
5. Fusion Method ■ Flash (Xenon Lamp)
6. Printing Area
a) Maximum Width
b) Maximum Length
■ Max. 17" (431.8 mm)
■ Max. 23
3
/
4
" (603.25 mm)
7. Paper
a) Width
b) Length
c) Thickness
■ 6 to 18 inches (152.4 to 457.2 mm)
■ 5 to 24 inches (127 to 609.6 mm)
■ 3 to 11 MIL
8. Paper Supply (Height) ■ 11.8 inches (300 mm)
9. Paper (Swing Guide Option)
a) Minimum Length
b) Maximum Length
c) Maximum Thickness
■ 7.5 inches
■ 12 inches
■ 4 MIL
10. Paper Stacker Capacity
a) Maximum Height
b) Maximum Width
c) Maximum Length
■ 11.7 inches (297.2 mm)
■ 18 inches (457.2 mm)
■ 16 inches (406.4 mm)
11. Maximum Ejection Size ■ 18" (457.2 mm) width x 16" (406.4)
■ Standard stacker table is 12" (304.8 mm)
Table C-1
LP 100R Printer Specification, continued