SATO M-8485Se - CONTROLS AND SIGNALS; INTERFACE CONNECTIONS; PROCESSING

Section 1. Specifications
General Printer Specifications (All Models)
SPECIFICATION M-8485Se/M-8460Se/M-8465Se/M-8490Se/M-8459Se
CONTROLS AND SIGNALS
On-Line LED
Power LED
Label LED
Ribbon (Not used on M-8459Se) LED
Error LED
LCD Panel 2 Line x 16 Character
On/Off-Line Switch Front Panel
Label Feed Switch Front Panel
Power On/Off Switch Front Panel
POTENTIOMETER ADJUSTMENTS
Print Darkness Inside Panel
Pitch Inside Panel
Offset Inside Panel
Display Front Panel
INTERFACE CONNECTIONS
(1)
Parallel IEEE1284
Serial
Serial Protocol
RS232C (9600 to 57.6 Kbps)
RS422/485 (9600 to 57.6 Kbps)
Hardware Flow Control (Ready/Busy)
Software Flow Control (X-On/X-Off)
Bi-directional
Ethernet 10/100BaseT
Universal Serial Bus USB Ver 1.1
Wireless LAN 802.11b/g
PROCESSING
CPU
32 Bit RISC
Flash ROM 2 MB
SDRAM 16 MB
Receive Buffer 2.95 MB
Optional Flash ROM 4 MB
Optional PCMCIA Memory
16 MB Flash ROM or 4 MB SRAM
(1) Plug-In Interface Modules
All specifications subject to change without notice.
Page iii