SATO M-8485Se - NORMAL MODE

Section 3. Confi
g
uration
NORMAL MODE
The printe
r
initiall
y
powers on in the ONLINE mode. The user can access the User
Settin
g
s usin
g
the followin
g
p
rocedures.
V
05.A4.01.02
INITIALIZING
Dis
p
la
y
s the firmware durin
g
the initialization.
ONLINE
QTY:000000
OFFLINE
000000
PRINT DARKNESS
1(L) 2(M) 3(H)
PRINT SPEED
4 6 8 10 12
The LCD will display the ONLINE status on the top line and
the bottom line will contain the label quantity (QTY) status.
The messsge will be changed to OFFLINE whenever the
printer is switched offline by pressing the LINE key.
As soon a
print job is received, the quantily line will indicate the number
of labels to be printed. As soon as the label job begins to print,
the display will indicate the number of labels in the print job
that remains to be printed.
Press the LINE key once. When the display changes to
OFFLINE, press the FEED and LINE keys simultaneously for
more than one second.
The LCD now displays the Print Darkness selections. The
current setting is indicated by a cursor over one of the range
settings. There are 3 possible selections (except for the
M-8459Se which has 5 possible selections). The lowest
setting represents the lightest print and the highest setting the
darkest print.
1. Press the LINE key to step the cursor to the desired setting.
2. Once the correct setting is underlined, press the FEED key
to accept the selection and step the display to the next
adjustment.
The print speed selections are dependent upon the printer
model. The current setting is indicated by the underline cursor.
1. Use the LINE key to step the cursor to the desired setting.
2. Once the correct setting is selected, press the FEED key to
accept the selection and step the display to the next
ad
j
ustment.
M-8459Se M-8485Se M-8460Se
/
8465Se
M-8490Se
2 ips 4 ips 4 ips
3 ips 6 ips 6 ips
4 ips 8 ips 8 ips
5 ips 10 ips
12 ips
Pa
g
e 3-10 SATO “Se” Print En
g
ines