SATO M-8485Se - Replacing the Fuse

Section 4.cleanin
g
and Maintenance
REPLACING THE FUSE
Supplies needed: 250V 15
A
Fuse
1.
Turn the
p
rinte
r
p
ower off and remove the
p
ower cable.
2. On the back of the printer, locate the Fuse Cap directl
y
above the AC connector.
3. Unscrew the ca
p
and remove the defective fuse.
4. Re
p
lace with a new 250V 15A fuse.
5. Screw the fuse cap back onto the printe
r
and replace the power cable.
A
C Fuse
A
C Input
Connector
Pa
g
e 4-6 SATO “Se” Print En
g
ines