Section 3. Confi
uration
HE
DUMP MODE
In
addition
to
the
Test
Print
Labels,
the
printer
can
print
the
contents
of
the
receive
buffer
in
a
hexadecimal
format
to
allow
the
data
stream
to
be
examined
for
errors
dia
nosis and
troubleshootin
.
05.A4.01.02
INITIALIZING
Dis
la
s the firmware durin
the initialization.
ONLINE
QTY:000000
The Hex Dump Mode is entered by placing DSW2-4 in the on
position and powering the printer on.
1. The printer is now ready to receive data.
2. Send the data stream to the printer.
3. The received data will be printed in a hexadecimal format.
Pa
e 3-30 SATO
“Se”
Print En
ines
OFFLINE
QTY:000005
During printing, press the Line key to take the printer
OFFLINE to pause the printing. To resume printing, press
the Line key again. This can be repeated as necessary.
To return the printer to normal operation, place DSW2-4 in
the OFF position and turn the printer OFF and then back
ON.
To Next Page
Loading...
